Regulateur MPPT 50 Ah/ Solar Charge

Description

Description:

With the advanced MPPT control algorithm, TRIRON N series controllers can minimize the maximum power point loss rate and loss time, quickly track the maximum power point of the PV array and obtain the maximum energy from solar modules under any conditions; and can increase the ratio of energy utilization in the solar system by 20%-30% compared with a PWM charging method. With the adaptive three-stage charging mode based on a digital control circuit, TRIRON N series controllers can effectively prolong the lifecycle of batteries, significantly improve the system performance and support all-around electronic protection functions, including overcharging and over-discharging protection to minimize damages to components of

the system caused by incorrect installation or system failure at the utmost, and effectively ensure safer and more reliable operation of the solar power supply system for a longer service time. This modular solar controller can be widely used for different applications, e.g., communication base stations, household systems, street lighting systems and field monitoring, etc.



Features:

Advanced MPPT control algorithm to minimize the MPP loss rate and loss time, tracking efficiency above 99.5%, maximum charge conversion efficiency as high as 98%.

Multiple load work modes, Support the lead-acid and lithium batteries with the needed tem. compensation.

Modular design, varied combination to meet different requirements, modularized LCD screen display operating data and status of the system

Full load operation during the working temperature range, high-temperature charging power derating function.

Provide 5V DC power through the dual USB output interface to charge

electronic devices



Specifications:

Models：Triron1206N / Triron2206N / Triron2210N / Triron3210N / Triron4210N / Triron4215N / UCS module / DS2 LCD display module / DB1 Module / DS1 LCD display module / RCM Module / RCS Module / USB1 Module (Optional)

System nominal voltage: 12/24VDC Auto

Rated charge current: 10A/20A/30A/40A (Optional)

Rated discharge current: 10A/20A/30A/40A (Optional)

Battery voltage range: 8～32V

Self-consumption: ≤14mA(12V)；≤15mA(24V)

Discharge circuit voltage drop: ≤0.18V

Temperature compensate coefficient: -3mV/℃/2V (Default)

Grounding: Common negative

RS485 interface: 5VDC/100mA

USB interface: 5VDC/2.2A(Total)

Relay interface: 30VDC/1A

Backlight time  Default: 60S, Range: 0~999S (0S:the backlight is ON all the time)

Working environment temperature: -25℃～+55℃(LCD) -30℃～+55℃（No LCD）

Storage temperature range: -20℃～+70℃

Relative humidity: ≤95%, N.C

Enclosure: IP30

Product Size: 30*19.8*10cm / 11.8*7.9*3.9inch

Package Size: 41.5*32*32cm / 16.3 * 12.6 * 12.6inch

Package Weight: 1.35kg / 2.97lb



Note:

1.When a lithium battery is used, the system voltage can't be identified automatically.

2.When a lithium battery is used, the temperature compensate coefficient will be 0,and can’t be changed

3. RCS module and DS2 LCD display module is not included, you can purchase on demand.



Package List:

1 * Solar Charge Controller

1 * User Manual